Non-pressure vacuum tube solar water heater is an open loop and
thermosyphon system. The vacuum tube with special absorptive
coating can absorb the sun energy and transfer sun energy to heat
energy. Whole system works according to the thermosyphon principle.
Water in vacuum tubes is heated and then rises to top of tank. Cold
water in tank goes down to the vacuum tube bottom. Water in the
system will be heated as circulation keeps going on. This type of
solar water heater is one of the most popular systems because of
its own advantages of high efficiency,cheap price,simple
Installation and free maintenance
|Vacuum tube||Spec. (mm)||Φ 58× 1800|
|Material||Borosilicate glass, magnetron spluttering selective coating|
|Water tank||Capacity||20000L tank|
|Inner tank||Food-grade stainless steel SUS304-2B|
|Insulation||Imported polyurethane integrated foam-forming 50~60mm|
|Tank shell||Color steel plate|
|Bracket||Spec. (mm)||1.5-4.0mm in thickness|
|Material||Hot-dip galvanized steel plate/Stainless steel plate /Aluminum
|Accessories||Stainless bolts & nuts, Silicon rubber seal, Dust proof rubber
seal, Plastic pipe holder.|
|Optional device||Electrical heater, Intelligent controller / Assistant tank, Pump|
|Tilt angle||10 ~ 50°|
|Water output||45-95 o C|
|Hail resistance||Φ 25mm|
Hot water for hotel,hospital,spa,laundry....
1. Advanced welding technology to prevent any leaking of tank
2. Special chemical layer between inner tank and outer tank to make
sure the density of foam the same everywhere
3. Non-pressurized solar water heater is such kind of a most
economical system with high efficiency at the same time. It works
depending on the gravity of water, so it's much better to be
installed on the slope or flat roof as top as possible to get
enough hydraulic pressure.
4. Automatically controlled by a computer.
5. Vacuum tube: Hail-resisting borosilicate glass with high-tech
selective coating ensures an efficient solar collecting, tri-target
vacuum tube with its patent interference coating makes the
efficiency not only improved by 12% but also with a high
temperature resistance (380oC).
6. Inner water tank: Food-grade stainless steel SUS304-2B as inner
tank keeps the water clean and drinkable, together with advanced
welding technics to ensure it with a long lifespan (15 years).
7. Water tank shell: Stainless steel for any climate.
8. Insulation Layer: Germany-imported polyurethane integrated
foam-forming with twice slaking treatment, preserves hot water
constantly as long as 70~80 hours.
9. Supporting Bracket: Hot-DIP galvanized steel plate with a good
weight bearing and wind resistance(140 km/hr), super mechanical
performance and corrosion resistance ensures a long life to ocean
coast, easy installation, universal bracket suitable for either
flat or slope roof installation.
10. Accessories: Stainless bolts & nuts, water-proof silicon
rubber, anti-aging dust-proof rubber seal, plastic pipe holder and
ventilating cap to ensure their lives as long as other parts of the